Thick film and thin film SMD resistors — 0201 to 2512, ±0.1% precision through general purpose.
SMD chip resistors are used in virtually every circuit for current limiting, voltage division, pull-up/pull-down, feedback networks and current sensing. We supply both thick film general-purpose types and thin film precision types with low TCR.
| Parameter | Supply Range |
|---|---|
| Case size | 0201 · 0402 · 0603 · 0805 · 1206 · 1210 · 2010 · 2512 |
| Resistance range | 1 Ω – 10 MΩ |
| Tolerance | ±0.1% · ±0.25% · ±0.5% · ±1% · ±5% |
| TCR | ±25 · ±50 · ±100 · ±200 ppm/°C |
| Power rating | 1/20W – 1W (by case size) |
| Technology | Thick film · thin film · metal film · metal strip |
| Special types | Anti-sulfur · current sense · high voltage · pulse withstand · zero ohm jumper |
| Termination | Matte Sn · lead-free · wraparound |
| Packing | Tape & reel 7" / 13"; cut tape available |
| Compliance | RoHS 3 · REACH · AEC-Q200 grades available |
Thick film resistors are lower cost and suit general purpose use (±1%/±5%). Thin film offers tighter tolerance (±0.1%–±0.5%), lower TCR and better long-term stability — preferred for precision analog, measurement and current sensing.
Yes. Anti-sulfur series are recommended for automotive, industrial and outdoor applications where sulfur in the environment can degrade standard terminations. Specify the requirement when enquiring.
Yes — metal strip and alloy current-sense types from a few milliohms upward, with low TCR and high power ratings. Share your target value, power and tolerance.
1 reel for standard parts. Cut tape and small quantities for prototyping can be arranged.
Send us your BOM or part number. Quotation within 24 hours.